Other Bits

You have your choice of a 7" SHORT CHEEK or a 9" LONG CHEEK.

7" Cheek is a less aggressive version of the Lifter Bit. It offers a nice option to aid the rider in aligning the horse's body and balancing the shoulder. It offers a firm yet unintimidating rate. The small gag and independent motion in the shanks makes this bit an excellent transition from the ring snaffle and a nice bit to ride in the pasture or trail.

The 9" lifter is designed primarily for horses that have a tendency to drop their shoulder in turns. The longer shank offers the rider leverage in helping to elevate the shoulder and maintain a balanced position in the horse's body. Because it's a correction bit, it should be used on a horse that is well into the shank bridle.

In both cases the mouthpiece should be adjusted where it meets the corners of the horse's mouth and creates a slight wrinkle. Two fingers should be between the chin and curb strap. "Lifetime Guarantee"

Excellent training or correction bit for a horse that is lugging on the bit. Mouth may be turned either way for severity. Rains may be connected in the center brackets for less rate and more sidepull. RIDE WITH LIGHT HANDS. DO NOT TIE HORSE IN THE BIT.We recommend you use bit guards with this bit to avoid pinching the horse's mouth. Bit guards can be purchased by visiting the "MISCELLANEOUS EQUIPMENT" page.

TEMPORARILY OUT OF STOCK. PLEASE CHECK BACK

7" CHEEK. 5" MOUTH. 7/16" 3 piece sweet iron mouth. The cheek allows the mouthpiece to move forward when the reins are pulled, allowing time for the horse to think before the curb and mouthpiece tighten. The mouthpiece lets the bars break at a steeper angle to apply pressure to the outside edge of the bars for a new feel and more control. We recommend you use bit guards with this bit to avoid pinching the horse's mouth. Bit guards can be purchased by visiting the "MISCELLANEOUS EQUIPMENT" page.

Similar to the CC Wonder Bit but functions with a twisted snaffle mouthpiece so the areas of pressure will be toward the roof of the mouth and on the bars. This is a great bit for adding flexibility and lift to your horse. We recommend you use bit guards with this bit to avoid pinching the horse's mouth. Bit guards can be purchased by visiting the "MISCELLANEOUS EQUIPMENT" page.

This is a great bit. Just like the LM Wonder Bit but for the horse that does not care for a snaffle mouth. Lots of lift and bend for the horse and comfortable for them too.

Stainless steel wonder bit with a hinged correction mouthpiece that has a stainless steel roller in the center and copper rollers on each side.

A nice stainless steel Wonder Gag bit with a dog bone and copper rollers. We recommend you use bit guards with this bit to avoid pinching the horse's mouth. Bit guards can be purchased by visiting the "MISCELLANEOUS EQUIPMENT" page.

At last a rope piece that can be added to a lot of bits for better balance, rate and control. Pliers are required for assembly and disassembly. Designed for use with the Quick Six bits but can be used with other bits also.

The unique design of the Quick Six bit offers direct control similar to a ring snaffle, while offering the additional control of curb pressure. This bit can serve as a training snaffle or as a transition bit for a horse that is ready to move along in the bitting process. We recommend you use bit guards with this bit to avoid pinching the horse's mouth. Bit guards can be purchased by visiting the "MISCELLANEOUS EQUIPMENT" page.

The unique design of the Quick Six bit offers direct control similar to a ring snaffle, while offering the additional control of curb pressure. This bit can serve as a training snaffle or as a transition bit for a horse that is ready to move along in the bitting process. We recommend you use bit guards with this bit to avoid pinching the horse's mouth. Bit guards can be purchased by visiting the "MISCELLANEOUS EQUIPMENT" page.

The unique design of the Quick Six bit offers direct control similar to a ring snaffle, while offering the additional control of curb pressure. This bit can serve as a training snaffle or as a transition bit for a horse that is ready to move along in the bitting process. We recommend you use bit guards with this bit to avoid pinching the horse's mouth. Bit guards can be purchased by visiting the "MISCELLANEOUS EQUIPMENT" page.

The unique design of the Quick Six bit offers direct control similar to a ring snaffle, while offering the additional control of curb pressure. This bit can serve as a training snaffle or as a transition bit for a horse that is ready to move along in the bitting process. We recommend you use bit guards with this bit to avoid pinching the horse's mouth. Bit guards can be purchased by visiting the "MISCELLANEOUS EQUIPMENT" page.

This bit has a very nice three-piece mouthpiece with swivel cheeks. There are brass toggles over a dog bone in the center. It works well on the horse that is a little too flexible but just needs a little lift in the turns. It is a very comfortable bit and horses really seem to like it. It has a 5" shank. This is our best selling and most versatile bit.

A great bit for the hard running horse that needs little to no assistance. It also works well on a horse that you need to take a little of the "bend" out of.

This hackamore comes in both a 7 inch cheek and a 9 inch cheek with a rope noseband. The shanks are spring loaded so you don't get a lot of pinch in a turn. It works well on the finished horse.

This is a great little hackamore that does not have a lot of whoa so it works well on a horse that rates real hard. You can get some lift and some flex.

This is a really great bit for a horse that is very soft and does not need a lot of help with either rate or flex. It allows for shoulder control and flex. Works very well on a horse that likes a snaffle mouthpiece. A great transition bit. It is accented with silver dots. We recommend you use bit guards with this bit to avoid pinching the horse's mouth. Bit guards can be purchased by visiting the "MISCELLANEOUS EQUIPMENT" page.

SORRY! THIS BIT IS TEMPERARILY OUT OF STOCK. PLEASE CHECK BACK SOON.

This is a great bit for the rider that likes the feel of the Junior Cowhorse bit and the horse that likes a chain mouth. You will get plenty of flex and lift with this bit. Your horse will appreciate the light feel.

MADE IN THE USA!

If the feel of a snaffle or chain mouth does not suit you or your horse try this Junior Cowhorse with a dogbone mouth piece. It may be just what you and your horse have been looking for.

Stainless steel training snaffle bit with 5" sweet iron mouth 3 piece snaffle with a center dog bone and copper roller. 5" shank. We recommend you use bit guards with this bit to avoid pinching the horse's mouth. Bit guards can be purchased by visiting the "MISCELLANEOUS EQUIPMENT" page.

This is a beautiful antique brown correction bit. It has silver horseshoes at the bridle and rein rings. This bit provides the control of a ported bit, while also allowing independent control of both left and right sides of the horse's mouth. The internal spring feature permits the smoother return of the port to it's original resting position. This low articulated correction bit has a 5 1/8" low port mouth w/copper roller, 7 1/2" shanks. 360o articulation on either side of the port.

Stainless steel rubber coated steel cable nose combination sliding gag bit with 8" cheeks. 5" sweet iron twisted mouth. We recommend you use bit guards with this bit to avoid pinching the horse's mouth. Bit guards can be purchased by visiting the "MISCELLANEOUS EQUIPMENT" page.

This bit is no longer available with the silver dots. It is now only available in Stainless Steel.

This is a very nice short cheek combination bit with a soft rope nose band which has less "bite" than a stiff rope nose band. It features a floating cheek with your choice of a slow twist snaffle mouth piece, a twisted mouthpiece with a dog bone or a smooth snaffle mouthpiece.. We recommend you use bit guards with this bit to avoid pinching the horse's mouth. Bit guards can be purchased by visiting the "MISCELLANEOUS EQUIPMENT" page.

3" Rings Wonderful for older colts, young horses or any soft mouthed horse. Contacts the nose first to tuck it, then gently picks up the mouth until the curb tightens for gentle but all over "nose, bars, lips, chin and face" control. Works exceptionally well with any type martingale or draw reins. "Lifetime Guarantee".

This short shank combination bit has a 3/8" slow twisted snaffle mouth piece and floating cheeks. It has a classification of medium plus control. We recommend you use bit guards with this bit to avoid pinching the horse's mouth. Bit guards can be purchased by visiting the "MISCELLANEOUS EQUIPMENT" page.

This is the same bit as the Short Cheek Combination Bit except it has a dog bone mouth piece so it will have more tongue pressure. We recommend you use bit guards with this bit to avoid pinching the horse's mouth. Bit guards can be purchased by visiting the "MISCELLANEOUS EQUIPMENT" page.

6" Cheeks Designed with more lift for horses that are getting down in their shoulders. Retains good control. Will also give your horse all the flex he needs to turn. The dog-bone mouth adds "bite" to this bit to better control horses that need more "rate". "Lifetime Guarantee"

This modified gag bit features the popular three piece sweet iron mouth piece with a copper roller and copper inlay. It has a 5" mouth and 7" cheeks with attractive german silver trim. We recommend you use bit guards with this bit to avoid pinching the horse's mouth. Bit guards can be purchased by visiting the "MISCELLANEOUS EQUIPMENT" page.

Excellent draw gag that has more mouthpiece action than a half circle gag. The twisted mouthpiece adds a little bite for more control and the three piece with dogbone adds some tongue pressure for better rate and increases the bar pressure for better control. We recommend you use bit guards with this bit to avoid pinching the horse's mouth. Bit guards can be purchased by visiting the "MISCELLANEOUS EQUIPMENT" page. See headstall below.

This gag bit has a 2 1/2" cheek. It is an excellent draw gag that has more mouthpiece action than the half circle gag. This mouthpiece packs well. It is small enough to have some "bite" for control but can be ridden for competition. "Lifetime Guarantee"

This Antique Brown Sliding Gag Bit has a nice three piece dogbone mouthpiece. This mouthpiece gives applied pressure to the palate, cheeks and bars of the horse’s mouth. The copper rollers soften the palate pressure while keeping the mouth moist.

Finally a leather draw gag headstall that really works. It adjusts to fit your horse and will stay in place when pulling on one rein. It is easy to install a bit by removing and reinstalling the rein ring. Made with high quality Hermon Oak leather.

Finally a leather draw gag headstall that really works. It adjusts to fit your horse and will stay in place when pulling on one rein. It is easy to install a bit by removing and reinstalling the rein ring. Made with high quality Hermon Oak leather.

Use these to turn any double buckle headstall into a draw bridle for your gag bits. Easy to convert.

The unique design of this bit offers direct contact similar to a ring snaffle with the shoulder elevation of a gag and the collection from a curb strap. This is a great training or transition bit. The gag movement allows the horse to give at the poll before the curb comes into effect. All of these bits should be adjusted to fit with one wrinkle in the horse’s mouth and a loose curb strap to allow 2-3 fingers.

This mouthpiece is often misrepresented, but is actually a very mild and useful training tool. The chain conforms to the shape of the horse’s mouth, applying mild tongue and bar pressure. This mouthpiece works well on horses in any discipline.

Cheek: 4 1/4” Mouthpiece: 51/4”.

The unique design of this bit offers direct contact similar to a ring snaffle with the shoulder elevation of a gag and the collection from a curb strap. This is a great training or transition bit. The gag movement allows the horse to give at the poll before the curb comes into effect. All of these bits should be adjusted to fit with one wrinkle in the horse’s mouth and a loose curb strap to allow 2-3 fingers.

This mouthpiece will apply more pallet and bar pressure and is an excellent all purpose mouthpiece which will work well on most horses. Sweet iron keeps a horse’s mouth moist.

Cheek: 4 1/4” Mouthpiece: 5 1/4”.